Sea To Summit - Ether Light XR Insulated Air Sleeping Pad

If comfort is a priority, you’ll do no better than the new Sea To Summit Ether Light XR.

Im a side sleeper. I have the XLite. Often feels like the baffles lack structure at the sides so in the mornings I'm fidgeting around feeling like im rolling off the mat. Not used a Tensor although I have heard it offers much better support for side sleepers. Also, the Xlite suffers from mould spots on what seems the outside. For comfort though, from all the mats ive laid on, sea to summit are the most comfortable

I am a 181cm, 100kg side sleeper and just bought the S2S Etherlight XR. It arrived this morning and my [**first impressions are here.** ](https://www.reddit.com/r/Ultralight/comments/1isa5ot/comment/mdq8c2p/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button)

Auspost delivered a new S2S Etherlight XR (regular Mummy) this morning so I set it up next to my old Thermarest Xtherm (2020 model) - Here are my first impressions. **Comfort** \- It feels more comfortable than my Xtherm. At 10cm thick it is much more plush. **Size/shape** \- The extra 4cm in width feels good. I am a 181cm, 100kg side sleeper and this feels like a better size and shape for me. It is also wider near the foot which is very welcome. **Profile** \- the Etherlight is higher at the sides than in the middle which feels a lot more stable. The Xtherm with its horizontal baffles regularly made me feel as though I was about to roll off the side. **Noise** \- They are roughly the same in volume but it is a different sound. The Xtherm sounded like a muted chip packet - still crinkly but not as noisy as the old Xlite. The Etherlight sounds more like a thick balloon - still makes a noise but a lower pitch. **Weight** \- Heavier. On my scales the Xtherm is 440g. S2S was 481g. **Warmth** \- The design looks pretty good. The new Etherlight uses reflective aluminium film - similar to the thermarest. The welds use a loop in the centre so it maintains an air gap even at the weld. Will actually take a few nights outside to really tell. I am not expecting it to be as warm as my old mat but we shall see. **Slipperyness** \- The fabric feels a little more grippy than the Xtherm so hopefully won't slip around as much. Once again - will need a few nights in the outdoors to really tell. **Packability -** Great. It folds down to same size as the Xtherm. I believe is a great improvement over the old Etherlight XT due to the new insulation. So on most points the Etherlight looks to be a winner. Size, shape and comfort is great. Weight is a bit higher and warmth is TBD but I feel like this is going to be my main mat form here on.

I tried both and went with the Ether Light XR. It came down to what felt good. I didn’t think the baffle design on the Tensor AS was comfortable or distributed weight well and much preferred the baffling on the Ether Lite as a side/stomach sleeper. I plan on upping the R value with a Z-lite pad if necessary.

The Ether Light is woven nylon just like the Nemo, but 30D vs 20D for the top. I compared them back in May, but I remember they felt fairly similar material-wise. I did think the Nemo was slightly more crinkly. The Ether Light is a little slippery, but I think it makes it easier to flip around. My last pad was a polyester Exped Dura which had a lot of friction going on with my clothes, which made it annoying to flip around at night because my clothes and quilt would get bunched up and twisted.

No problem! It was one of the reasons I switched pads. The other was that I didn’t find vertical baffles all that great for side sleeping. The arm I slept on frequently went numb, and I’m pretty sure it was from the baffles pressing against it.

I’ll second the XR. It’s pretty comfy for stomach/side sleeping. But also, I tried out the NeoLoft at REI this weekend and holy crap is it a comfy cradle of air.

I have an Exped Dura 3R and it’s very warm and so far, has proven to be durable. I’ve taken it down to 30°f with no extra foam pad beneath and slept warm. Never had any air leak out. I’m not a huge fan of the vertical baffles, but I must say that the edge baffles being slightly thicker does help keep me centered. Exped uses a microfiber insulation on these pads instead of reflective film, and I’m sold on it. I intended to swap the Exped for the new Sea to Summit Etherlite XR that has reflective insulation, but I shivered my way through a 42°f night on it.

When I did Baker I brought a closed cell pad (Nemo switch back) and an inflatable (Sea to summit) for comfort and redundancy. You'll be hard pressed to find a new bag that's also lightweight for $200. You'll probably need to see if you can find something used or I would recommend you see if you can rent one.

Picked up a S2S Etherlight XR and had my first 4 days on it recently. Super comfy, even as a side sleeper.

Sea to summit etherlight xr is very comfortable for a side sleeper as well, while not being too heavy or bulky.

Ended up getting a couple sea to summit mats on sale for $60.

Big Agnes and sea to summit checks all your boxes. Small/compact, uses vertical baffles to prevent that bouncy castle feeling and provide actual support

Rapide sl is peak. My favorite pad. Ive got a sea so summit pad that i love too but can't remember the name of it. It has like a 7 or 8 r value tho.